Garud hulk oilseal number

Garud Hulk Oil Seal Number | The Tractor Hub
🔧 Rotavator Spare Parts Guide

Garud Hulk
Oil Seal Number

Complete bearing & oil seal part numbers for the Garud Hulk Rotavator — with prices, sizes, and expert buying tips for Indian farmers.

📅 Updated: January 2026 ✅ Verified Part Numbers 🇮🇳 Indian Market
GEAR BOX PTO 6309 6310 Grease Side GBox Side
Garud Hulk Rotavator GRTG/GRTC170542 — 7 feet heavy duty Garud Hulk

Garud Hulk Rotavator

The Garud Hulk (Model GRTG/GRTC170542) is a heavy-duty rotavator for 50–75 HP tractors. It features an extra heavy-duty gearbox, powerful side drive, and sealed bearings. Knowing the correct oil seal and bearing numbers saves time and money at the spare parts shop.

50–75 HP Heavy Duty Gearbox Side Drive 6–8 Ft Width L / C Type Blades
⚙️ Bearing Numbers — Garud Hulk
PositionPart NumberType
Dead Side6309Deep Groove Ball
RD Gear Box Side — Bottom6311Deep Groove Ball
Gear Box Side — Middle30210Taper Roller
Cross Shaft Gear Box30209/30309Taper Rolle
Gear Box Side — Top30209Taper Roller
🔴 Oil Seal Numbers — Garud Hulk
PositionSize (mm)/ Part NumberType
Main Oil Seal — RD sideSAPF100890072244NB60Mechanical face seal
Main Oil Seal — Dead sideSAPF108250635032NB60Mechanical face seal
Shaft Oil Seal40 × 73 × 8Shaft Seal
📌 Benefits of Using a Mechanical Face Seal in a Modern Rotavator A mechanical face seal (Duo Cone Seal) is used to protect the rotor shaft bearings from dust, mud, water, and other contaminants. Its main benefits are:(1)Excellent sealing performance against dirt, sand, water, and mud. Longer bearing life by preventing contamination and retaining lubricant. Reduced maintenance because the seal requires less frequent replacement. Leak-proof operation, minimizing oil leakage from the gearbox or rotor housing. High durability under heavy agricultural and abrasive working conditions. Reliable performance even at low speeds and high torque. Lower operating costs due to fewer repairs and reduced downtime. Improved machine efficiency by ensuring smooth and continuous operation. Extended service life of the rotor assembly and related components. Suitable for harsh environments, including wet fields, rocky soil, and dusty conditions.
SAPF100890072244NB60
Rotavator Gearbox Parts
Garud Hulk Rotavator view
Garud Hulk — Field View
💰

Oil Seal MRP (Market Price — India)

Oil seals (SAPF100890072244NB60) are available at ₹600 – ₹800 per set.
This price covers both oil seal RD side and dead side models. mechanical face seal model costs slightly more but gives much longer service life.

MAIN SHAFT GEAR BOX Top: 30209 Middle: 30210 Bottom: 6311 Grease Side 6309 Gear Box Side 6311 Oil Seal 65×85 Oil Seal 65×85 Bearing Oil Seal Gear Box

Cross-section diagram — Garud Hulk Rotavator shaft layout (not to scale)

💡 Buying Tips
  • 1 Mechanical Face seal Branded and orignal oil seal. gives better sealing against dust and mud — very important for Leak proof for rotavator use in India.
  • 2 For bearings, choose branded makes: SKF, Deluxe, or Texspin. Unbranded bearings fail quickly under the heavy load of a rotavator shaft.
  • 3 Before buying, confirm the oil seal part no. by measuring your old seal or the housing depth.
  • 4 Inspect the shaft before fitting a new seal. If the shaft has a groove or rust at the seal contact point, the new seal will also start leaking within days.
  • 5 Apply a thin coat of grease on the seal lip before fitting to prevent dry-start damage and ensure the seal seats smoothly in its housing.
  • 6 Check the rotavator gearbox oil level every 2–3 days during heavy field work. Low oil level causes rapid bearing wear and overheating.

Need These Parts?

Azad Automobiles, Hazaribagh — Tractor & Rotavator Spare Parts Dealer

Contact on WhatsApp
garud hulk RD side
garud hulk rotavator delta oil seal
Garud hulk dead side
garud hulk rotavator mechanical oilseal
Translate »